20220326141712

China wholesale 1533-45-5 - EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA

Hello, come to consult our products !

China wholesale 1533-45-5 - EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA


Product Detail

Product Tags

Related Video

Feedback (2)

Always customer-oriented, and it's our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Vitrified Bead Insulation Mortar , Hpmc Coa , Improve Liquidity , We welcome new and previous customers from all walks of lifestyle to contact us for long run organization relationships and mutual achievements.
China wholesale 1533-45-5 - EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA Detail:

Specifications:
Appearance: White powder or white crystalline powder
Odor: No odor
Chloride(Cl): ≤0.05%
Sulfate(SO4): ≤0.05%
Iron(Fe): ≤0.001%
Heavy metal(Pb): ≤0.001%

PH: 4-6
Purity: ≥99.0%
Melting point: 252℃
Solubility: soluble in water, slightly soluble in ethanol, ether.
Packing: 25KG /bag

Application:
EDTA 2NA is an important complexing agent for complexing metal ions and separating metals. This product is used as bleaching fixing solution for color photographic material developing and processing, and dyeing auxiliary, fiber treatment agent, cosmetic additive, medicine, food, agricultural chemical microfertilizer production, blood anticoagulant, complexing agent, detergent, stabilizer, synthetic rubber, polymerization initiator and heavy metal quantitative analysis agent, etc. In the chlorinated reduction initiation system for SBR polymerization, disodium EDTA is used as a component of the active agent, mainly for complexing iron ions and controlling the rate of polymerization reaction.

Production Process:
1.Slowly add the mixture of sodium cyanide and formaldehyde to the aqueous solution of ethylenediamine in a certain ratio, and pass air at 85℃ under reduced pressure to remove the ammonia gas. After the reaction, adjust the Ph value to 4.5 with concentrated sulfuric acid, and then decolorize, filter, concentrate, crystallize and separate, and dry to get the finished product.

2.Mix 100kg of chloroacetic acid, 100kg of ice and 135kg of 30% NaOH solution, add 18kg of 83%~84% ethylenediamine under stirring, and keep it at 15℃ for 1h. Slowly add 30% NaOH solution in batches until the reactant becomes alkaline, and keep it at room temperature for 12h. Heat to 90℃, add activated carbon to decolorize. The filtrate is adjusted to 4.5 Ph with hydrochloric acid and concentrated and filtered at 90℃; the filtrate is cooled, crystallized, separated and washed, and dried at 70℃ to obtain the finished product.

3.Made by the action of ethylenediaminetetraacetic acid and sodium hydroxide solution: In a 2L reaction flask equipped with a stirrer, add 292g ethylenediaminetetraacetic acid and 1.2L water. Add 200mL of 30% sodium hydroxide solution under stirring and heat until all the reaction is finished. Add 20% hydrochloric acid and neutralize to pH=4.5, heat to 90℃ and concentrate, filter. The filtrate is cooled and crystals are precipitated. Extract and separate, wash with distilled water, dry at 70℃, and get the product EDTA 2NA.

4.Add ethylenediaminetetraacetic acid and water to the enameled reaction tank, add sodium hydroxide solution under stirring, heat until all the reaction, add hydrochloric acid to pH 4.5, heat to 90°C and concentrate, filter, the filtrate is cooled, filter out the crystals, wash with water, dry at 70°C, and get EDTA 2NA.

zx (1)
zx (2)


Product detail pictures:

China wholesale 1533-45-5 -
 EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA detail pictures

China wholesale 1533-45-5 -
 EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA detail pictures

China wholesale 1533-45-5 -
 EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA detail pictures


Related Product Guide:

Our merchandise are broadly identified and trusted by end users and can satisfy continually developing economic and social requires for China wholesale 1533-45-5 - EDTA disodium salt (EDTA 2NA), CAS#6381-92-6 – MEVA , The product will supply to all over the world, such as: Ireland , Portugal , Indonesia , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
  • The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Ruth from Oslo - 2018.06.05 13:10
    After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
    5 Stars By Bella from Burundi - 2017.03.28 12:22
    Write your message here and send it to us